Adjustable Universal CDI (AC) - GUANG HER CHENG ELECTRONICS INDUSTRIAL Co., Ltd.

After 3 years development by our Research and Development , we just developed one Universal CDI which was tested and found to be suitable for almost 85% motorcycles in Taiwan !! GHC started the Research&development of this product since 1989 in Taiwan and with very good quality image for OEM CDI and REG for motorcycle.

A. Specification

Operation Temperature

-20~+60

Storage Temperature

-30~+80

B.Application and Function

1. Applied to single cylinder engine ignition coil of less than 250CC

2. Applicable to 6~70pole length ACG, see below:

3. Applied trigger coil (pick-up coil) type, two type pick-up signal all suitable

Can be triggered at 0.7v+/_0.25v

Signal type:

4. Various Resistor: the ignition advance timing can be adjusted to suit more engine with this resistor.

5. One set 5A/12V relay: Output is available when the engine is over 800rpm (normally applied in PTC control; when the engine speed is less than 800rpm, switch (off)

1. Do not exceed the max range of specs. In application.

2. Incorrect connection might damage the CDI

Advance timing must be adjusted properly, otherwise it might affect the engine